TPS extenders for single CATx cable
 Part No: 9154 0001 (TX95), 9154 0002 (RX95)


HDBaseTâ„¢ and the HDBaseT Alliance logo
are trademarks of the HDBaseT Alliance.

Highlight features

  • Single-Link DVI and HDMI extension supporting 4K and 3D
  • Extends Single-Link DVI or HDMI + Ethernet + RS-232 + IR over one CATx cable up to 170 m distance
  • 10/100 Ethernet transmission
  • Bi-directional RS-232 and IR
  • HDCP compliant, CEC, EDID transparent
  • Operation mode switch (Auto or forced Long reach mode)


Lightware DVI-HDCP-TPS-TX95 and DVI-HDCP-TPS-RX95 twisted pair HDBaseTâ„¢ extenders provide extension of uncompressed Full-HD video for long distances over a single CATx cable. The unit offers bi-directional RS-232, IR, and Ethernet pass-through all on the same CATx cable that carries the video signal. The TPS extenders support full HDCP and EDID compliance and works at all standard AV resolutions up to 4K and 48-bit color depth handling all standard audio formats as well as 120 Hz 3D signals. Remote powering is available through the single CATx cable, but a local power supply can also be used. All devices can be ounted on a rack shelf or used standalone formats.

The Auto operation mode allows the device to detect the far end extender's mode and adopt it. If the far end device is in Auto mode or it is a third party HDBaseT device the link will be set to HDBT mode. If the far device is in forced Long reach mode then the Auto operation will set the Link to Long reach mode.



  • Post production studios
  • Control room
  • Digital Signage
  • Multiroom video
  • Conference rooms, collaborative telepresence



  • Single-Link DVI and HDMI extension over a single CAT7 cable
  • Two available firmware versions to maximize potential cable length
  • Operation mode switch (Auto or forced Long reach mode)
  • Low power mode in Auto operation mode
  • 10/100 Ethernet extension
  • Bi-directional RS-232 pass-through
  • Bi-directional IR pass-through
  • Supports all DVI resolutions up to 1080p or 1920x1200
  • Supports all HDMI 1.4 resolutions
  • Remote powered through CATx cable
  • HDCP compliant, CEC, EDID transparent
  • Compatible with 120 Hz 3D video signals
  • Uncompressed video/audio up to 10,2 Gbps
  • Live, Link detection, Video and HDCP detection LEDs
  • Rack mounting options
  • Locking DC connector

Data rate: 3.4 Gbps per color
Resolution: All HDMI 1.4a resolutions supported
Equalization: adaptive, automatic
EDID support: transparent
HDCP pass-through: yes
Ethernet pass-through: yes
RS-232 pass-through: yes
IR pass-through: yes
Overall signal delay: 10μs (including 100m CATx cable)
Power: universal power adaptor, DC 12 V 2.5 A
Power consumption (-TX): 3.6 W (typ) 4.2 W (max)
Power consumption (-RX): 5.3 W (typ) 6.1 W (max)
Enclosure: 1 mm metal
Dimensions: 100.4 W x 100.4 D x 26 H mm
Net weight: 330 g / product
Compliance: CE
Warranty: 3 years

TX input, RX output: DVI connector
TX output, RX input: RJ45 (TPS interface)
Ethernet: RJ45
IR in, out: 3.5 mm TRS connector (1/8'' mini-jack)
Serial port: 9-pole D-sub
Power: locking DC connector (2.1 / 5.5 mm)

Max cable lengths with the available firmware versions
Resolution Pixel clock rate Cable lengths (Auto / LR link mode)
1024x768@60Hz 65 MHz 100 m / 130 m* 90 m / 120 m* 120 m / 170 m*
1280x720p@60Hz 73,84 MHz 100 m / 130 m* 90 m / 120 m* 120 m / 170 m*
1920x1080p@60Hz / 24bpp 148,5 MHz 100 m / 130 m* 90 m / 120 m* 120 m / 170 m*
1920x1200@60Hz 152,9 MHz 100 m / NA 90 m / NA 120 m / NA
1600x1200@60Hz 162 MHz 100 m / NA 90 m / NA 120 m / NA
1920x1080@60Hz / 36bpp 223,6 MHz 70 m / NA 70 m / NA 100 m / NA
3840x2160@30Hz UHD 297 MHz 70 m / NA 70 m / NA 100 m / NA
4096x2160@30Hz 4K 297 MHz 70 m / NA 70 m / NA 100 m / NA

* with Long reach operation mode which supports pixel clock frequencies up to 148,5 MHz
** when remote powering is used with AWG26 cables, distances are 20% shorter.

product brief front view
back view cad drawing

comparison chart


download TPS family brochure


Standalone diagram


Locking DC plug

twist 90° clockwise to lock

Supplied accessory


Universal DC adaptor
Part No: 1180 0051

Wall power adaptor with  interchangeable plug for international use.



IR transmitter-receiver pair
Part No: 1374 0003 TX, 1374 0002 RX

Supplied transmitter and receiver unit for IR extension.

Optional accessories

Under desk mounting kit
Part No: 5240 0275

The UD-kit makes a single device easy to mount on any flat surface (e.g. furniture).

Under desk mounting kit double
Part No: 5240 0276

The UD-kit double makes it easy to mount multiple devices on any flat surface (e.g. furniture).

Rack shelf
Part No: 5240 0269

1U high rack shelf provides mounting holes for fastening four quarter-rack sized units. Pocket sized devices can also be fastened on the shelf.


PSUx10-200-12V and PSUx20-400-12V



Rack mountable power supply unit for Lightware products.